Heat Pump Repair in Fort Lauderdale, FL
If your system quits, tell us what it's doing and a licensed contractor who covers Broward County will get in touch.
Tell us about the job
It takes about a minute.
Your heat pump never gets an off season
In Fort Lauderdale your heat pump runs all 12 months. Summer afternoons averaging 91°F keep it cooling for hours at a stretch, and winter nights only drop to 58°F, so it rarely gets a real break the way a system does somewhere with a true winter. That kind of steady run time wears on the compressor and the fan motor faster than a system that gets to rest part of the year.
Most homes here heat with electricity, so the same unit is what keeps the house comfortable no matter the season. Storms are part of life in Broward County too. Statewide, 38% of households went at least 24 hours without power in 2024. A heat pump that loses power and does not restart on its own leaves the house with no heating or cooling until someone looks at it.
- 58°F
- the average winter night it heats against
- 91°F
- the average summer afternoon it cools against
Florida requires HVAC contractors to hold a state license.
The state tests contractors before they get this license and keeps a record of who holds one. It's tied to the contractor, not to any single job, so the same license that covers a heat pump repair in Broward County covers the next one too, wherever in the state it happens.
A heat pump repair usually means working on the refrigerant side, the coils and lines that move refrigerant through the system. Anyone doing that, in Florida or anywhere else, has to hold EPA Section 608 certification on top of whatever the state requires. Florida's license is what puts a name and a record behind the person doing the work.
Sources: Florida Legislature · Florida Department of Business and Professional Regulation
- Why is my heat pump blowing cold air?
- In Fort Lauderdale this almost always means the system is stuck in cooling mode or the reversing valve isn't switching it over. Since your winter nights rarely drop much below 58°F, that valve may sit unused for long stretches and can stick when it's finally called on. A dirty air filter or low refrigerant charge can also keep the air from feeling warm even when the unit is trying to heat. A licensed contractor can test the reversing valve and check refrigerant levels to find out which it is.
- Why is there ice on my heat pump?
- Ice on the outdoor unit usually means airflow is restricted or refrigerant is low. A dirty filter, a coil caked with dirt, or a fan that isn't moving enough air across the coil will all drop its surface temperature low enough to freeze moisture from the air. Low refrigerant does the same thing by letting the coil run colder than it should. Turn the system off and let the ice melt on its own rather than chipping at it, then have a contractor check the coil, airflow, and refrigerant charge.
- Why is my heat pump running but not cooling?
- If the unit is running but the air coming out isn't cold, the most common cause is low refrigerant from a leak, though a failing compressor or a blocked outdoor coil can do the same thing. With summer afternoons here averaging 91°F, a system that's low on refrigerant will struggle badly and run long stretches without keeping up. Check that the outdoor unit isn't blocked by leaves or debris, then have a licensed contractor check the charge and pressures to find where the problem is.